Vertical turning is a popular technique that is used in tandem with traditional bikes that are traditionally ridden. With the help of the vertical turning technique, a biker can be able to ride straight up the lane while moving sideways. It will take some practice to learn this technique, but once you are able to do this, it can save you a lot of time and money.
Before you can start to move sideways, you will need to turn your bike into a normal straight line. To do this, turn your front wheel 180 degrees clockwise. This is done by pulling in on the handlebars so that your bike is on a flat plane. Hold the clutch in until you hear it click and see the indicator light on the left side of the handlebars go away.
Now you will want to move forward until your front wheel is parallel to the lane on the far side of the track. This is where you want to start your turn. You want to begin your turn by turning the handlebars in the direction you are turning, which is counter-clockwise.
As you turn, you will want to keep the left hand grip tight on the bars so that you do not lose your momentum as you begin your turn. To maintain your momentum as you turn, you will want to pull in on the handlebars slowly, much like a motorcycle. Keep the handlebars as straight as possible and remember that a brake is a must in this situation, as well.
While you are turning, you will want to be careful about your front tire contact with the asphalt. If you do not have enough speed on your front wheel for the turn, you will want to lean on the handlebars to get some speed back on your front wheel. If you feel you can maintain your position and do a full 90 degree turn without losing speed, then you will want to do so. The last thing you want to do is to put too much speed on your front wheel when you are turning.
A good thing to remember about turning your bike in tandem with a vertical turning technique is that you want to keep your hands on the bars. Also, make sure that you are not leaning. When you lean, you put too much weight on the outside of your bike. Keep the weight on the inside.
Once you have mastered the concept of turning your bike, you will be able to shift your weight left or right and still maintain a straight line. It is a skill that will become second nature to you. You will also be able to make a 180 degree turn, which is difficult for most of us to do without some practice.
In order to use this technique, you will want to buy a good style bike that is on two wheels. You will also want to purchase a very fast bike that is made specifically for this purpose. Do not try to build an expensive bike just to learn this technique, as it will be better to spend the money on a more powerful bike to avoid injury.